Graflex.org

manifestdestiny · Joined: 30 Dec 2001 Posts: 8 Location: NYC

i have a crown graphic with what i was told is a graflex back. it's the standard 4x5 spring-type back, it accepts sheet film holders, my 545i polaroid back, quickload holders, etc.

the problem: i'm looking into buying a rollfilm back, and i've been trying to dismantle the back in anticipation of a new one. i have the two chrome sliding locks with tabs, one above, one below, but the tabs are not engaging anything. when i slide the tabs out of the way, the back still does not come off. any suggestions? this is getting weirder and weirder every day as i wonder how to remove the back from the camera i've been shooting with for over a year already...

thanks so much...

45PSS · Posted: Sat Aug 31, 2002 3:22 am Post subject:

In addition to the chrome slide locks, are there chrome arms about 1/8 inch wide that parallel the hinged portion from insertion edge to center that are ribbed at the center end?? If so press down or in toward the camera on the ribbed area then out toward the insertion side of the camera.

_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.

manifestdestiny · Joined: 30 Dec 2001 Posts: 8 Location: NYC

thanks for the reply...

there are most definitely ribbed arms as you described...i'm trying to press on them in that way, as well as any other way, but nothing is budging.

any other suggestions?

45PSS · Posted: Sat Aug 31, 2002 5:37 am Post subject:

Congrats.! You have a GRAFLOK. (or so it seems) If it hasn't been removed in a while it may be stuck. Push it as far as possible to the left (non insertion side) then try again. Read more about it here: http://www.graflex.org/speed-graphic/features.html#GraflokBack
And read this recent post if you haven't.
http://graflex.org/helpboard/viewtopic.php?topic=915&forum=12&2
Charles

_________________
While a picture may be worth a thousand words, a quality photograph is worth a million.

[ This Message was edited by: 45PSS on 2002-08-30 22:44 ]

manifestdestiny · Joined: 30 Dec 2001 Posts: 8 Location: NYC

your directions were excellent, as it turns out there is a certain angle the assembly must be at to slide off of the back. i was forcing the insertion-side upwards at a really inappropriate angle, assuming that would be the way to remove it. brilliant.

i also realized that i mis-typed my first message, i meant to say that it had a graflok back, not a "graflex" back. i made sure that i bought a camera with a graflok back, but had convinced myself that somehow my camera had turned into a different model since i was unable to remove the ground glass like everybody else with a graflok-equipped crown graphic.

anyway, it works fine now. thanks much...