| View previous topic :: View next topic |
| Author |
Message |
peter k
Joined: 26 Dec 2009
Posts: 207
Location: Sedona Az
|
 Posted: Sat May 05, 2018 2:33 pm Post subject: Spring Back & Graphic film pack adapter |
 |
|
Have a 3x4 anniversary speed graphic with a spring back. Will a 3x4 film pack adapter slide into it? Its thicker than a regular film holder, didn't want to try it without verifying first.
Have two of them and thinking of adapting them for dry plate, or for use with Fugi wide Instax film. |
|
| Back to top |
|
 |
45PSS
Joined: 28 Sep 2001
Posts: 4081
Location: Mid Peninsula, Ca.
|
| Posted: Mon May 07, 2018 12:34 am Post subject: |
|
|
One thing about Graphic backs, they will tell you their limit if you try to exceed it. Some Graphic backs will accept grafmatics while others will not. If the FPA will not fit it will not go beyond half way in or if at the spring travel limit be very hard to push in. If it gets stuck loosen the spring mount screws 1/2 to 1 1/2 turns in half turn increments until it comes out.
A standard flat washer for the spring mount screw can be put between the body and the spring to give the back extra clearance without compromising the integrity of the back.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
| Back to top |
|
|
peter k
Joined: 26 Dec 2009
Posts: 207
Location: Sedona Az
|
| Posted: Mon May 07, 2018 1:02 am Post subject: |
|
|
Ok will gave it a try... no problem... thanks .. now unto a new adventure.  |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
