| View previous topic :: View next topic |
| Author |
Message |
rwhitbread
Joined: 09 Apr 2016
Posts: 8
Location: Ottawa, Ontario
|
 Posted: Mon Apr 11, 2016 12:10 pm Post subject: Minitaure Speed Graphic Solenoid Mount Bracket |
 |
|
I have an old 1939 Graflex Miniature Speed Graphic in 2 /14 x 3 ¼ that I am setting set up into a fully functional camera. I have almost everything complete, except a few odd parts and cables.
I am looking for a Solenoid mounting bracket, and two cables, (an S-17 and an A20). The cables will more than likely need to be a reproduction order from Paramount Cables as the original cables typically crack and break easily after years of unattended storage.
I have included a picture of the bracket in question. Unfortunately I do not have the Graflex part number.
If you have one of these, or point me in the direction of either the part number, or the part itself, I would be eternally grateful.
An image of the bracket from the manual that came with the camera
[img]https://goo.gl/photos/KwYH3LjFohHFCr667[/img]
A front view of eh camera's actual lens board with tape measure
[img]https://goo.gl/photos/DxBK6zReD81UyEGEA[/img]
An image of the solenoid with tape measure
[img]https://goo.gl/photos/UUDDzi8e2JeMd3eC7[/img]
The camera itself, almost ready for field trials
[img]https://goo.gl/photos/jB2PpsKdFdbjqojaA[/img]
Any help is greatly appreciated
_________________
Richard R.Whitbread |
|
| Back to top |
|
 |
rwhitbread
Joined: 09 Apr 2016
Posts: 8
Location: Ottawa, Ontario
|
| Posted: Thu Apr 14, 2016 2:58 pm Post subject: Re: Minitaure Speed Graphic Solenoid Mount Bracket |
|
|
| rwhitbread wrote: | I have an old 1939 Graflex Miniature Speed Graphic in 2 /14 x 3 ¼ that I am setting set up into a fully functional camera. I have almost everything complete, except a few odd parts and cables.
I am looking for a Solenoid mounting bracket, and two cables, (an S-17 and an A20). The cables will more than likely need to be a reproduction order from Paramount Cables as the original cables typically crack and break easily after years of unattended storage.
I have included a picture of the bracket in question. Unfortunately I do not have the Graflex part number.
If you have one of these, or point me in the direction of either the part number, or the part itself, I would be eternally grateful.
An image of the bracket from the manual that came with the camera
[img]https://goo.gl/photos/KwYH3LjFohHFCr667[/img]
A front view of eh camera's actual lens board with tape measure
[img]https://goo.gl/photos/DxBK6zReD81UyEGEA[/img]
An image of the solenoid with tape measure
[img]https://goo.gl/photos/UUDDzi8e2JeMd3eC7[/img]
The camera itself, almost ready for field trials
[img]https://goo.gl/photos/jB2PpsKdFdbjqojaA[/img]
Any help is greatly appreciated |
Well at least I now know the proper part name and number:
The part I ma looking for is:
Graflex R1 Release Mount
Catalog #2563
_________________
Richard R.Whitbread |
|
| Back to top |
|
|
rwhitbread
Joined: 09 Apr 2016
Posts: 8
Location: Ottawa, Ontario
|
| Posted: Fri Apr 15, 2016 2:50 am Post subject: |
|
|
Item found!
_________________
Richard R.Whitbread |
|
| Back to top |
|
|
rwhitbread
Joined: 09 Apr 2016
Posts: 8
Location: Ottawa, Ontario
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
