Graflex.org

[berrybd]

Hot Dog! My 3x4 TeleGraflex is all lined up, new mirror, got a good focus panel for the back, all my mag bags ready, got a 10-inch f6.3 Zeiss too, even has a stop-down lever. Only one problem: the focal-plane shutter is disemboweled. Can I buy a 3x4 Speed and simply uninstall that shutter and reinstall it on my Graflex?

[semihemi]

I can't speak for the 3x4, but in the case of a 4x5 the switcheroo will not work. You could physically attach the Speed shutter and wind it on, no problem. However, the spacing of the apertures in the Speed curtain would not match the spacing in the original reflex curtain. So the camera would appear to function just fine but in fact the film area would not be entirely exposed when you tripped the shutter. Even worse, the shutter might come to rest with part of the film still receiving exposure. I would be virtually certain that this problem would also affect the 3x4 size.

Best of luck with the 3x4. Best bet is to fabricate an entirely new shutter. It is worth the effort. Bert Saunders can send directions to you if you send up the "Bert signal".

Happy New Year,

Semi

[DHF845]