| View previous topic :: View next topic |
| Author |
Message |
weare66
Joined: 01 Jul 2003
Posts: 2
Location: Lorain Ohio
|
 Posted: Thu Jul 10, 2003 1:59 am Post subject: |
 |
|
I have two units and one charger that appears not to be charging.Does anyone have an electrical schematic for this charger.
Thank You
|
|
| Back to top |
|
 |
wolftinz
Joined: 13 Jul 2003
Posts: 1
Location: Upstate new York
|
| Posted: Sun Jul 13, 2003 4:33 pm Post subject: |
|
|
If you are asking about the AC adapter (Cat.# 4-1361) you probably have a broken lead. This can be checked with a ohm meter.
The circuit is very simple, a transformer to step up the line voltage from 115VAC to aprox. 600VAC and a pair of diodes to half wave retify to 450VDC.
The reason I suspect it's a brocken lead is that this is the most common failure mode due to a design flaw. The Ac pins are not well secured in the package and will flex with repeated pluging and unpluging, that coupled with short leads from the transformer core will often cause thes thin leads to break. If the lead going in to center of the core breaks you can forget trying to repair it.
If some one has a source for a replacement adapter I would be very interested,
Best regards,
Wolf
[ This Message was edited by: wolftinz on 2003-07-13 09:34 ]
[ This Message was edited by: wolftinz on 2003-07-13 09:36 ] |
|
| Back to top |
|
|
45PSS
Joined: 28 Sep 2001
Posts: 4081
Location: Mid Peninsula, Ca.
|
| Posted: Tue Jul 15, 2003 1:26 am Post subject: |
|
|
Do you need a diagram for the Strobe 250 charger or for the Booster/Analyzer?
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
