Graflex.org

Henry · Posted: Sat Sep 05, 2015 8:42 pm Post subject:

OlderGuy, if you get a blank (undrilled) lens board and don't feel comfortable tackling the job yourself, you can have a machine shop drill the hole to your exact specifications. That's what I've done, at a cost here of $8 per. But that was some years ago. YRMV!

OlderGuy · Joined: 20 Aug 2015 Posts: 10 Location: Santa Cruz CA

I think I am going to send the lens to S.K.Grimes get the CLA done and have a board made at the same time. That will cut down on shipping and I will have a nice lens and lens board. From what I have read, Grimes can do all this and that seems to make the best sense.

Thanks again for all of the input,
Steven
_________________
What did I get into anyway?

Henry · Posted: Sat Sep 05, 2015 9:04 pm Post subject:

Sounds like a plan. Good luck! Let us know how everything turns out.