View previous topic :: View next topic |
Author |
Message |
bobphillips001
Joined: 10 Feb 2022 Posts: 1 Location: Mesa, Arizona
|
Posted: Fri Feb 11, 2022 5:24 pm Post subject: Part missing from Kalart? |
|
|
I have a 4x5 Crown Graphic with a side mount Kalart synchronized rangefinder. It appears to have a part missing. The top of the rangefinder has a hole with three notches. Looking down into that hole I am able to focus. It is impossible however to do this with the Graphlite mounted. Photographs I am seeing show an angled piece fitted on the top of the rangefinder. Suggestions on what I am missing and where I might find a replacement? _________________ The 4x5 press cameras were REAL cameras. |
|
Back to top |
|
 |
45PSS
Joined: 28 Sep 2001 Posts: 4081 Location: Mid Peninsula, Ca.
|
Posted: Fri Feb 11, 2022 8:15 pm Post subject: |
|
|
look at the last page of the kalart manual https://graflex.org/speed-graphic/kalart-manual.html
There is a plate that attaches with a screw to cover the hole when a Focuspot is not installed. Make a plate from .015-.020 steel, aluminum, brass painted flat black. _________________ The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU. |
|
Back to top |
|
 |
|