Graflex.org

glodes

I am looking for a 120 film holder for a small RB series B camera. The mounting plate needs to be 4¼" x 5½". I have been unable to find a back with those demensions. If anyone has any direction I would appreciate their input!

Thanks,
George

Dan Fromm · Joined: 14 May 2001 Posts: 2144 Location: New Jersey

45PSS · Posted: Thu Mar 06, 2014 8:15 pm Post subject:

George,
go to http://graflex.org/helpboard/viewtopic.php?t=6356&postdays=0&postorder=asc&start=15 page 2 and look at the picture in the post by Nesster. The RFH on the right is the type you need, hard to come by.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.

glodes · Posted: Fri Mar 07, 2014 12:19 am Post subject:

This is the size of the plate I am looking for: https://onedrive.live.com/redir?resid=A4A22527CA4E976B!2601&authkey=!AKI7u8W4lFbYplg&v=3&ithint=photo%2c.jpg

https://onedrive.live.com/redir?resid=A4A22527CA4E976B!2602&authkey=!ACNZHLkOGwYNI-s&v=3&ithint=photo%2c.jpg

Must be an odd size

Dan Fromm · Joined: 14 May 2001 Posts: 2144 Location: New Jersey

Not an odd size. That's a 3 1/4 x 4 1/4 film pack adapter, a 3 1/4 x 4 1/4 roll holder will fit where it does. Your problem is finding a 3x4 roll holder that will fit a Graflex back. They exist but aren't common.

Be patient, scan eBay once or twice a week and eventually you'll get one.

45PSS · Posted: Fri Mar 07, 2014 6:10 pm Post subject:

you could make an adapter out of baltic birch plywood, black acrylic, ABS, or similar materials for more common Graphic RFH's for 2x3 cameras.
_________________
The best camera ever made is the one that YOU enjoy using and produces the image quality that satifies YOU.