Graflex.org Forum Index Graflex.org
Get help with your Graflex questions here
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Available Light
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic    Graflex.org Forum Index -> Film Help
View previous topic :: View next topic  
Author Message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Thu Jul 22, 2004 2:32 pm    Post subject: Reply with quote

A quick review of currently available B&W materials suggests that there no longer are any sheetfilms faster than 400EI. I knew "Royal-X" was gone, but had hoped "T-Max P3200" would be offered in sheets. Seemingly not; nor is the Ilford superspeed emulsion. Am I wrong about this, or are we going back to the days of fuming with ammonia, latensification, and benzotriazole?
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Fri Jul 23, 2004 12:00 am    Post subject: Reply with quote

The issue likely is most people using LF today aren't in a rush. The only people I hear wondering about faster film is people shooting 8x10 or bigger. Even then it's to cut down any motion related problems. I'd wager most people using LF are either taking photos of things that don't move or are in studios with plenty of light. The market for fast LF must be small.

The funny thing is I keep looking for slower film to use with shutter less lenses-)
Back to top
View user's profile Send private message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Fri Jul 23, 2004 12:29 am    Post subject: Reply with quote

...which is another way of saying that people no longer use 4x5 equipment as "press" cameras! I can see why; but I have been thinking about the posts from Simplify about Environmental Portraits taken without a flashgun, and about Stilagrrl and her Polaroid "WinkLight," and recalling that something like "Isopan Rekord" at f:5.6 in a 4x5 camera might work very well in bright interiors with low contrast.

Ah, well, there's always wet collodion.
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Fri Jul 23, 2004 1:04 am    Post subject: Reply with quote

There was a story a few months back about someone using a 4x5 at US Senate hearings but that's about it I guess for press cameras being used for press use.

The 3200 speed Ilford film is only 1000 ISO I think. The Kodak I don't think is much better. While better then 400 speed films I'm not sure it's alot better then using a film that pushes well.

The combination of 400 speed film and a reasonable flash might provide all the light a person needs. The cheaper handle mount flashes have all the features needed. Weren't press cameras normally used with flashbulbs in the past?
Back to top
View user's profile Send private message
Rangemaster



Joined: 06 Jul 2001
Posts: 412
Location: Montana, Glacier National Park

PostPosted: Fri Jul 23, 2004 1:36 am    Post subject: Reply with quote

Well I guess we might as well get used to it, Kodak has announced an accerated decline of film and plans to lay even more people off in the US plants, due to the popularity of their digital and digial kiosks....

Hmmmm

Dave

_________________
Focus on the Picture, Not on the Glass.
Satin Snow(TM) Ground Glass
Back to top
View user's profile Send private message Send e-mail Visit poster's website
glennfromwy



Joined: 29 Nov 2001
Posts: 903
Location: S.W. Wyoming

PostPosted: Fri Jul 23, 2004 2:35 am    Post subject: Reply with quote

When the light gets too low, I just fall asleep anyway, so I don't worry about anything faster than ASA 400.

_________________
Glenn

"Wyoming - Where everybody is somebody else's weirdo"
Back to top
View user's profile Send private message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Fri Jul 23, 2004 4:20 am    Post subject: Reply with quote

There is a certain amount of legendry associated with surreptitious photos made (often in courtrooms, once in an execution chamber) by available light with "Speed Graphics," and a whole lot of esoteric lore (peaking, I think, in the mid-1950s) on boosting effective film speed.

There remains "Diafine." I've never been fond of the negatives it produces, but it does allow you to use "Tri-X" at EI 1600 in situations without deep shadows. We may hope that Kodak's evident pride in "Tri-X" -- it seems to be the sole survivor among LF films with traditional grain structure -- will enable the company to withstand the whining of all the young securities analysts.
Back to top
View user's profile Send private message
Top



Joined: 06 Apr 2002
Posts: 198
Location: Northern New England USA

PostPosted: Fri Jul 23, 2004 12:13 pm    Post subject: Reply with quote

Ethol UFG will do the trick as well-an EI of 1200-1600 or so.
Top
Back to top
View user's profile Send private message Send e-mail
Micah in NC



Joined: 26 Jun 2003
Posts: 94
Location: North Carolina

PostPosted: Fri Jul 23, 2004 1:36 pm    Post subject: Reply with quote

T.R.,

Unless you want enlargements, why not get a pack of Type 57 Polaroid film? I have taken very neat shots with the stuff and it's ASA 3000 speed (a true rating, as far as I know).

It's not awfully grainy (IMHO) since Polaroids are contact prints anyhow.

--Micah in NC
Back to top
View user's profile Send private message Send e-mail
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Fri Jul 23, 2004 3:04 pm    Post subject: Reply with quote

I've used "Type 57" (and its precursor, "Type 47" rollfilm in a Polaroid "110"); and I'd do it again, if there were a need.

As noted above, it seems to me that the old available-light techniques might be useful to some of the contributors to this board, given their interests and the limitations of flash with pre-WWII equipment.

The Polaroid superspeed material was a marvel, when it was introduced (late '50s, as I recall). The problem, which you recognize, is that it yields a same-size print. If I wanted a just-under-4x5 print of a scene photographed with existing light, I'd photograph it with a 35mm. camera (e.g., Exakta "VXIIa" with f:2 "Biotar") and make a 3x enlargement!
Back to top
View user's profile Send private message
Simplify



Joined: 12 Jul 2004
Posts: 43

PostPosted: Fri Jul 23, 2004 3:21 pm    Post subject: Reply with quote

Quote:
Simplify about Environmental Portraits taken without a flashgun


I'm not too sure I should admit this, but I bought another 4x5 Anniversary Speed a couple of days ago after I realized my current one does not do flash because of the lens.

So, my new one comes with camera, (perfect sync127mm f/4.5 ektar) tripod, case, 7 film holders, film pack adapter, flash bulbs, flash gun, 7" & 5" reflectors, side light holder with clamp, focusing hood, rangefinder in perfect sync (which I finally figured out how to use this morning thanks to this place! The directions in the book weren't clear enough for me. duh!) sunshade, filters. WOW! All E+++ from the same seller I bought the first beauty from. I kind of wish I'd seen this one first. But now I have a back up body?

Speaking of film, I am starting with Tri-X 400 because I "know" it. I think with 2 flashes on my new body I'll be fine for my project. Not sure how to use the Sekonic L-358 with them though as I feel sure it won't plug into my Graflites?

I also got the 55 polaroid but now I wish I'd know about this 3000 speed stuff! Maybe I'll try that next time.

It's a definite steep learning curve but I am mostly enjoying every minute of it. It really is simple once you figure it out. Totally different world from any camera I have ever owned! But I really like it!

I just know I could not have come even this far so fast without this site and all who contribute! So, THANKS!


Back to top
View user's profile Send private message Send e-mail
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Fri Jul 23, 2004 4:24 pm    Post subject: Reply with quote

Quote:

On 2004-07-23 08:21, Simplify wrote:
I think with 2 flashes on my new body I'll be fine for my project. Not sure how to use the Sekonic L-358 with them though as I feel sure it won't plug into my Graflites?




You mean with the flash bulbs? No reason it can't work but it might be expensive-) Put the meter in cordless model and pop the flash. This is easy with somebody to hold the meter in the right spot. The meter also has a port on the front to plug a flash into. Just need the right cable and maybe a safe sync type device. Put the meter in corded mode and then just push measure. This way works great when you're alone. But aren't bulbs kind of expensive?
Back to top
View user's profile Send private message
t.r.sanford



Joined: 10 Nov 2003
Posts: 812
Location: East Coast (Long Island)

PostPosted: Fri Jul 23, 2004 4:25 pm    Post subject: Reply with quote

Whatever kind of equipment you use, it's a very good idea to have two of it ("sad experience teacheth me...")!

If each rangefinder is correctly adjusted for its lens, you also are in a very good position to compare the differences in apparent perspective between a normal and a somewhat wide lens. I think you'll find one better for some things, the the other preferable for other things.

Are you planning to use a flashmeter with bulb flash? Be sure to read the meter instructions before you do that; some flashmeters take a 1/125 sec. sample, and that won't work with the rather slow burn of a flashbulb. The old Wein "WP500" would read bulb flash, and some others do, too. But you may wind up resorting to guide numbers (eeek!)
Back to top
View user's profile Send private message
Nick



Joined: 16 Oct 2002
Posts: 494

PostPosted: Fri Jul 23, 2004 4:28 pm    Post subject: Reply with quote

Sekonic has a great support forum on thier website. Ask today and they usually have an answer the next morning.
Back to top
View user's profile Send private message
Simplify



Joined: 12 Jul 2004
Posts: 43

PostPosted: Fri Jul 23, 2004 5:29 pm    Post subject: Reply with quote

Thanks again! I think I will just go the old guide number route. I would not want to waste a bulb to take a reading. Those things are pretty expensive! I have been quite spoiled with strobes and meters etc ... so this too will be a totally new experience for me. I've gone from a digital slr to a 1940's LF! This seems backwards but it takes a whole lot more knowledge about the technical aspects I think. The muscle between my ears could use a little exercise anyway! Off to study guide numbers!
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Graflex.org Forum Index -> Film Help All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group